Chrome Wheel Nut And Can Be Used On Steel Wheels. Sold Singularly. Fits DFM / DFSK Loadhopper Models With 1000cc And 1300cc Engines. IMPORTANT:- THESE ARE 20MM SHORTER TYPE WITH DOMED FACE.
TIGHTEN TO 80NM
Left Front Steering Arm Assembly. Comes As Inner Knuckle Joint/Track Rod End Joint/Lock Nut And Rubber Boot. Fits DFM / DFSK Loadhopper Models With 1000cc/1200cc/1300cc Engine.
Left Front Steering Arm Assembly. Comes As Inner Knuckle Joint/Track Rod End Joint/Lock Nut And Rubber Boot. Fits DFSK C31/C32 And "V" Series Loadhopper Models With 1300cc/1500cc Engine.
Steering Column Upper Assembly. Fits DFM / DFSK Loadhopper Models with 1000cc And 1300cc Engine. WITHOUT POWER STEERING.
IF CONVERTING POWER STEERING TO MANUAL STEERING USE UPPER COLUMN ASSEMBLY 1002211ST AND LOWER COLUMN 100094ST
Upper Steering Column Assembly. Fits DFSK Loadhopper
When Converting From Power Steering To Manual Steering.
Lower Column Shaft 100094ST Will Also Be Required.
Open Coated Road Wheel Mounting Nut. Use With Steel Wheels Only And Sold Singularly. Fits DFM / DFSK Models With 1000cc/1200cc/1300cc And 1500cc Engines. TIGHTEN TO 80NM
Updated Replacement Original Factory Unit. These Units Have The Motor On The Right Side As Opposed To The Original Left Side. Fits DFSK Big Cabin Loadhopper Non Airbag Models With 1200cc/1300cc Engines. Will Fit Early 1300cc Pickup/Van Models With Modification.
TELEPHONE ORDERING ONLY.
Power Steering ECU. Direct Replacement For The Original Factory Unit. Fits DFM/DFSK Loadhopper Models With 1300cc Engines. TELEPHONE ORDERING ONLY. UNIT IS NOT RETURNABLE
Right Front Steering Arm Assembly. Comes As Inner Knuckle Joint/Track Rod End Joint/Lock Nut And Rubber Boot. Fits DFM / DFSK Loadhopper Models With 1000cc/1200cc/1300cc Engine.
Right Front Steering Arm Assembly. Comes As Inner Knuckle Joint/Track Rod End Joint/Lock Nut And Rubber Boot. Fits DFSK C31/C32 And "V" Series Loadhopper Models With 1300cc/1500cc Engine.
High Strength Allen Bolt For Clamping Lower Column Knuckle Onto Steering Rack Splined Spigot. Comes With Washers And Locking Nut.Fits DFM / DFSK Models With 1000cc /1200cc/1300cc Engines.
Bare Steering Rack. Does Not Come With Tie Arms, Rubber Boots Or Track Rod Ends. Fits DFM / DFSK Loadhopper Models With 1000cc/1200cc / 1300cc Engines.
IMPORTANT:- If Inner Knuckle Arm Locking Washers Are Required Order 2 x 1001945ST
Steering Rack Inner Arm/Knuckle. Fits Right Or left side And Supplied With Locking Washer. Fits DFM / DFSK Loadhopper Models With 1000cc/1200cc/ 1300cc Engines.